|
|
Bucket Elevators |
Bucket elevators are designed conforming to IS-7054, IS-6833. Bucket elevators handle practically all loose materials if lumps are not too large for the buckets. Depending upon the type of discharege bucket elevators are in three type:-
a) Continuous discharge Belt / Chain type.
b)Centrifugal discharge Belt/ Chain type
c) Positive discharge Belt/ Chain type
The typical bucket elevator consist of a series of buckets mounted on a chain or belt operating over head and foot wheels.Take up units are provided as a means to compensate for variations in length of chain or belt due to temperature changes, atmospheric cnditions ,or a wear.
Selection of the proper type of bucket elevator depends largely on capacity requirements and charectristic of the material handled.
|
|
|
|
|
Roller Conveyor |
Powerised and Unpowerised roller conveyors are designed conforming to IS-5895 & CEMA standards.Roller conveyors are line restricted devices and consist of rollers mounted between two side members. Bearings are usually incorporated in the idlers to cut down the mechanical losses.
An unpowered gravity roller conveyor is set at an appropriate incline and goods move down it by gravirty.In powered roller conveyor the power unit normally electric motor drive the rollers via Chains or belts, providing controlled movement of goods.
|
|
|
|
|
Screw Flight |
Canara manufactures various type screw flight such as cut screw flight,paddle type screw flight,ribbon flight, regular standard type. Canara manufactures screw flight in Mild steel, Stainless Steel, PP etc. Diameter of the screw flight ranges from 100 mm to 1500 mm in varoius pitches both in right hand and left hand. Canara also supplies Contineous type screw flight upto 3 mt length in varoius diameter and pitches
|
|
|
|
|
Screw Feeder |
In Screw Feeder only a controlled amount is carried to the discharge.In Screw feeder the inlet portion of the trough is made to flooded with the material and by means of a shroud in the trough or by the use of tubular trough.
Several factors should be established before selecting a screw feeder, these being:
1. Kind and Character of material being handled.
2. Density of the material as conveyed
3.Maximum rate at which material is handled
4.Overall length of feeder
Type of Screw Feeder :-
Single Screw feeder
Multiple Screw Feeder
|
|
|
|
|
Screw Conveyor |
Screw conveyors are bulk material transporting devices capable of handling a great variety of materials which have relatively good flowability.Flowability is defined as the degree of freedom of individual material particles to move past each other. The various application of screw conveyors proceed naturally from two factors ie, the characteristics of the material to be conveyed and the operating advantages peculiar to this type of conveyor. Screw conveyors operated horizontally, inclined or vertically.Screw conveyors are designed conforming to IS-5563 and CEMA standards.In screw conveyor transportation of bulk material is achieved by rotation of a tubical screw, thus moving the material axially in a trough or tube. Screw conveyors are manufactured in MS, SS,alloy materials and PP.
Design of Screw Conveyor required following data-
1. Mateial to be conveyed and bulk density
2. Capacity per hour to be conveyed.
3.Length of the screw conveyor
4. Horizontal or inclined
5. If inclined then degree of inclination
6. MOC of the screw conveyor like Mildsteel, SS etc
|
|
|
|
|
Bel.T. Conveyor |
Belt Conveyors, occupying an outstanding position in the feild of bulk materials handling, are the most versatile and widely used of all the conveyors.Belt conveyor has ability to handle practically any kind of material economically and dependably.
Belt conveyors are outstanding in thier ability to handle tremendous tonnages of bulk materials economically. The range of sizes which may be handled on belt conveyors is limited only by the width of belt.Materials may vary from extremely fine chemicals to lumpy ore, stone, coal or pulpwood logs.
CANARA'S BELT CONVEYORS ARE DESIGNED TO CONFIRMING TO IS-4776, IS-8597 AND CEMASTANDARDS.BELT CONVEYORS ARE CAPABLE OF HANDLING A WIDE VARIETY OF BULK MATERIALS.
Based on the material to be conveyed belt conveyor is two types-
1. Flat belt conveyor
2. Troughed belt conveyor.
|
|
|
|
|
Slat Conveyor |
Slat conveyors are designed conforming to IS standard. These Conveyors are extremely versatile due to their simple design and construction. Maintenance and tracking problem with these conveyors are minimum. It can carry heavy load of steeper angles and also easily be made to change slope for loading and unloading.
|
|
|
|
|
En Masse Conveyor |
Keeping in mind the varied and changing necessities of our patrons, we are affianced in providing a wide assortment of En-Masse Conveyor. Reachable with us in different sizes, dimensions and stipulations, these offered conveyors are highly acknowledged and accredited amongst our patrons. Along with this, to serve utmost gratification of our customers, we provide customized solutions for these to our patrons.
Features:
- Longer Life
- Sturdy
- Rugged
|
|
|
|
|
Chain Conveyor |
Chain conveyors are designed conforming to various IS and CEMA standards.Chain conveyors cover a wide variety of conveyor using chain on the driving element such as:-
a) Drag chain conveyor
b) Scaper conveyor
c) Slat conveyor
d) Enmass conveyor
e) Apron conveyor
chain conveyors employ continous chain that travel the entire length of conveyor, transmitting the pull from the driving unit and same cases carrying the whole weight of the transported materials. The matrials may be carried directly by the chains by flights pushed or forced by the chain or special attachment fitted to the chains.
|
|
|
|
|
P.P. Screw Conveyor |
Polyprophelyne (pp) screw conveyor is used where the product handled is highly corrosive like chlorine. All the parts are manufactured in pp materials.PP Screw conveyor developed by Canara is used to transfer edible maida in which chlorine is added through the nozzels.Screw flight is paddle type which helps in movement of materia as well as mixing of the materials.
|
|
|
|
|
Grain And Seed Destoner |
Being a customer focused organization; we are immensely affianced in providing a broad collection of Grain and Seed Destoner. The basic inputs used in the manufacturing of these products are obtained from consistent vendors of the industry after stringent quality examinations. Along with this, to uphold their safety during final delivery, we provide them after packing in supreme quality and tamper proof packing material.
Features:
- Simple adjustment and Easy operation.
- Totally enclosed and dust proof.
- Low noise and Longer life.
|
|
|
|
|
Seed Cleaner |
To serve the increasing and differentiated requirements of our patrons in the efficient manner, we have been involved in offering an extensive plethora of Seed Cleaner. These are highly commended amongst our patrons due to their characteristics such as sturdiness, precise patterns, robustness and much more. Furthermore, we promise delivering these seed cleaners at the door of our patrons within the assured time frame.
Features:
- High separation efficiency.
- Simple design and sturdy construction.
- Low maintenance and operating cost.
Operation:
- Seeds are fed in to the machine and distributed evenly across the width of upper screen. A pair of vibratory motors create reciprocating movement of the cleaner to enable the material to move on the sieve and pass through the perforated screen.
- All large impurities are separated from the top deck and fine dust & particles from the bottom deck.
- Dust and light particles are sucked of by a strong upward draught of air created by air aspiration system. All the seeds are duly cleaned are collected in front of the machine.
|
|
|
|
|
Rotary Air Lock Valve |
Rotary Air Lock valve is also called as Rotary Vane Feeder, consist of rotating pocketed rotar operating in a housing, so that pockets receive materials from one opening in the housing and deliver it through another. The control of material flow is obtained by regulating the speed of the rotor.
Canara manufactures wide range of rotary air lock valves made out of CI , SS or Mild steel body. The sizes varies from 100 m dia to 800 mm dia.
|
|
|
|
|
Spares And Accessories |
Canara supplies various types of spares required for conveying systems:-
1. Buckets- seamless in MS and SS
2. Chain- redler, Bulflow.Elevator chain
3. Slat
4. Screw Flight
5. Roller for belt conveyors
6. Pulleys
7. Belt- rubber,PVC,PU, wire
9. Sprockets
10.Rotary air lock valve
11. cenrifugal blowers
|
|
|
|
|
Chlorination Plant For Food Products |
Chlorination for maida conveying.
|
|
|
|
|
|
|
|
|